jeudi 17 mars 2016

GVP Combo 060

Voici une bonne nouvelle pour les possesseurs de GVP 040 Combo, l'adaptateur 040/060 fonctionne !

C'est Christer un lecteur de ce blog qui me poste ces photos !

Avec ma speciale exec.library 45.20a pour son Amiga 2000 flashée dans une eprom, l'ordinateur boot :

Il est nécessaire de changer l'oscillateur, et de remplacer l'original par un 33 Mhz pour obtenir un 68060 fonctionnant à 66 Mhz :
 
Il est conseillé d'utiliser la 68060.library v46.7 de Phase5
   

16 commentaires:

  1. Le meilleur, The Best, Il Signore del 68060...

    RépondreSupprimer
  2. Is it only a Adapter with Voltage Regulator.? Or some PLD PAL neccessary.
    No Bootrom changes.? I would to have it too. Have the same CARD.
    My 68040/33 is soldered so desoldering is necessary.
    Greetings
    Buddy from Germany

    RépondreSupprimer
    Réponses
    1. Yes, only the adapter !
      Of course, you need a special exec.library in rom who disable the Fpu at boot...

      Supprimer
  3. Is is only a Voltage Adapter? Or have some PAL GALS PLDs on it. ?
    No Bootrom change nessarty ? I d like to have it too. A lot of Information would be nice.
    Have same card. But with insoldered CPU. Another Question where what will be if we cpuld change the WD 33C93 Against WD33C93A. Because is low traffic compared against a slot CARD. 1.5 against 4.5. This would be a nice trick too.
    Greeting Buddy from Germany.

    RépondreSupprimer
    Réponses
    1. Don't know for the WD33C93A.

      Yes, you can update the eprom 1.5 to the last 4.5

      Supprimer
  4. I mean MB/s not Versions. Between SCSI Chips.

    I use the Gururom from Ralph Babel.4.15 on GVP Card.

    Do you mean ROM on GVP or Kickstart on Mainboard ?
    exec.library is in the kickstart true ?

    What about the new Kickstart 3.1.4. So you must build your own one.?
    How ? With tool ?
    Thank you

    RépondreSupprimer
  5. There is FPU disabled by default. ?

    RépondreSupprimer
  6. Great Site. You repairs for you own.? My France is not very well so
    i discover your site through GOOGLE Translater. Can you help me by cybergraphx V4.0. I have a Cybervision3d/64 Card which only works by BoingBag3.9 Drivers. 41.22. All other stuff will not work. I get the Message. Command can not be execute at boot by LOADMONDRVS. with newset versions. Thanks

    RépondreSupprimer
    Réponses
    1. Yes, I do all by myself on this blog...

      Strange issue, should works... The best way is to build your own Kickstart 3.9, all in rom is better... May solve your problem...

      Supprimer
  7. Yeah better they hat been going in 1MB ROM. Better they had include the bouncing Amiga Ball as only a picture so whe can directly see, the Amiga is dancing well.

    RépondreSupprimer
  8. Hey Cosmos I have you adapter. However is the CPU soldered in the GVP 040 Combo or not.. By the way nice design..

    RépondreSupprimer
    Réponses
    1. This card is from a reader of this blog : If I remember right, the CPU 040 is soldered, yes...

      Supprimer
  9. Cosmos... I was able to de-soldered the Cpu and put a socket in.. However building the 040->060 adapter.. For the Regulator I used a SMD LT1085. Will a SMD be fine or not..

    RépondreSupprimer
  10. The SMD one have the same Ampere than the non-SMD ? If yes, you can...

    RépondreSupprimer

Posté vos remarques :